simCAN Advanced Two-Vehicle Approach Scenario
==============================================

This sanitized sample is derived from a real bench-development workflow. It
contains 56 CAN signals and 6,048 time/value breakpoints across two buses. All
organization, operator, vendor, local-user, and original file-path references
have been removed.

Included files
--------------
- simCAN_Two_Vehicle_Approach_Scenario.xlsx
- simCAN_Relative_Scenario.dbc
- simCAN_Motion_and_Range.dbc

The workbook uses manual signal packing so it remains portable and does not
depend on the DBC files living at a particular path. The sanitized DBC files are
included to show the corresponding message and signal definitions.

First run
---------
1. Extract all files into a normal project folder.
2. Open simCAN and keep Dry run selected.
3. Import simCAN_Two_Vehicle_Approach_Scenario.xlsx.
4. Review the two bus assignments, the signal list, and several profiles.
5. Validate the scenario and run it in Dry run.
6. Configure your own approved CAN hardware only after reviewing identifiers,
   packing, bitrate, channel, termination, bus capacity, and expected results.

Important
---------
This is an engineering workflow example, not a safety-validation procedure or
a claim of compatibility with any vehicle, sensor, controller, or CAN adapter.
Application diagnostics do not replace independent bus and receiver evidence.

Product: https://simulatedsignals.com/?source=advanced_scenario
Support: support@simulatedsignals.com
